很多人在購買完鋁卷之后，一定要記得放置好 ,因為放置的不到位，很容易讓鋁卷出現氧化的情況，這樣就失去了我們購買鋁卷的意義了。因此大家有必要了解一下鋁卷應該放置在什么地方。
Many people must remember to place the aluminum coil after purchasing it, because if it is not placed in place, it is easy for the aluminum coil to oxidize, which will lose the significance of purchasing aluminum coil. Therefore, it is necessary to know where the aluminum coil should be placed.
1.將鋁卷用塑料薄膜包妻好，如果條件允許的話，好是放置在有干燥劑的地方，這樣能夠?qū)⒖諝饫锩娴乃治眨瑥亩苊饬顺霈F(xiàn)氧化的問題；
1. Wrap the aluminum coil with plastic film. If conditions permit, it is better to place it in the place with desiccant, so that the moisture in the air can be absorbed, thus avoiding the problem of oxidation;
2.如果鋁卷是放在木箱里面的，那么我們要保證木箱的濕度要小于18% ,而且鋁卷的溫度不能高于45°C ,大家不要記錯了；
2. If the aluminum coil is placed in a wooden box, we should ensure that the humidity of the wooden box is less than 18%, and the temperature of the aluminum coil should not be higher than 45 ° C. don't make a mistake;
3.如果在放置期間突然由低溫區域轉到高溫區域，那么我們不要立即將包裝打開，因為這樣很容易出現氧化的情況，我們應該等到鋁卷適用之后在進行拆封，這樣就不會出現氧化的情況；
3. If it suddenly changes from the low temperature area to the high temperature area during storage, we should not open the package immediately, because it is easy to cause oxidation. We should wait until the aluminum coil is suitable for unpacking, so that oxidation will not occur;
4.如果倉庫里面漏雨、漏雪，那么不應該放置鋁卷，這樣很容易讓其出現氧化的情況，這一點一定要切記。
4. If there is rain or snow leakage in the warehouse, the aluminum coil should not be placed, so it is easy to cause oxidation, which must be kept in mind.
鋁卷既可以整卷包裝，也可以分成小卷；鋁卷襯紙芯或鋁芯，以防止鋁卷變形，或受擠壓發生彎折；鋁卷要用塑料布密封，封口用透明膠帶密封好，防止水汽進入造成鋁卷腐蝕變色外包裝使用厚紙殼包裝緊實，也可在塑料布與紙殼之間加一層牛皮紙，將包裝好的鋁卷放置在木托上，并用鋼帶加固。
Aluminum roll can be packed in whole roll or divided into small rolls; aluminum roll is lined with paper core or aluminum core to prevent aluminum roll from deformation or bending due to extrusion; aluminum roll should be sealed with plastic cloth and sealed with transparent tape to prevent water vapor from entering and causing corrosion and discoloration of aluminum roll. Thick paper shell can be used for outer packaging, and a layer of kraft paper can be added between plastic cloth and paper shell to seal aluminum roll The coil is placed on the wooden support and reinforced with steel strip.