誤區一
Misunderstandings
雕花鏤空鋁單板用于室內，裝飾天花、屏風、隔斷等。擔心鏤空后的鋁單板用于室外，容易變形。
The carved hollowed aluminum sheet is used for indoor, ornamental smallpox, screen, partition and so on. Fear of hollowed out aluminum sheet for outdoor, easy to deform.
雕花鏤空鋁單板主要由面板、加強筋和掛耳組成，采用氟碳噴涂，并有的數控折彎技術，確保板材在加工后能平整不變形，在鋁單板安裝過程中共抗外力性能超群。
The carved aluminum hollow veneers are made up of panels, stiffeners and hangers. Fluorocarbon sprayed and advanced CNC bending technology is used to ensure that the boards can be smooth and deformed after processing, and the external force performance is outstanding in the installation process of aluminum panels.
掛耳可直接由面折彎沖壓成型，也可在面板上鉚裝角碼成型。加強筋與面板后背面的焊接螺釘與面板連接在一起從而形成一牢固的整體，極大增強了鋁單板的強度與剛度。保證了在產品的長期使用中的平整性及抗風作用。
Ear hanging directly from the surface of bending punch forming, but also in the panel riveting corner molding. The welding screws of the stiffeners and the rear face of the panel are connected to the panel to form a solid whole, which greatly enhances the strength and stiffness of the aluminum sheet. It ensures the smoothness and wind resistance in the long term use of the product.

誤區二
Misunderstandings two
雕花鏤空鋁單板只能實現簡單的圖案，不能加工出復雜花紋。
The carved hollowed aluminum sheet can only achieve simple patterns and can not produce complex patterns.
璽世金屬全新引入鏤空切割技術，將鋁板按設計師的圖形進行切割，工藝準確性高，不損傷表面，加工工件時在冷卻狀態切割，不變形，切割面平滑不刺手，無毛刺、切割豐小，工藝精細，準確性高，質量好，適合各種精度高、復雜圖、大幅圖、異形圖、曲線圖等各種復雜的圖案切割。
The introduction of the new hollow metal seal cutting technology, cutting aluminum by graphic designer, technology of high accuracy, no damage to the surface of workpiece in cutting state of cooling, no deformation, smooth cutting surface does not sting, no burr, cutting Feng small, sophisticated technology, high accuracy, good quality, suitable for all kinds of precision high, complex map, map, a special graphs, such as complex pattern cutting.
雕花鏤空鋁單板可加工成各種規格和不同形狀的非標鋁板，鏤空鋁單板可根據設計師的要求，定制成各種天花、幕墻、包柱等的圖案。
Carved and hollow aluminum sheets can be processed into non-standard aluminum plates of various specifications and shapes. Hollow aluminum sheets can be customized to various patterns such as smallpox, curtain walls and packing columns according to the requirements of designers.
誤區三
Misunderstandings three
過度追求節省成本，降低鋁板厚度。
Excessive pursuit saves cost and reduces the thickness of aluminum plate.
根據國家要求標準，厚度低于2.0mm的鋁單板不能用于外墻裝飾。經過雕花鏤空處理的鋁單板，具有透風的特點，比普通幕墻鋁單板受風力影響更大，若厚度不足，將會出現變形現象。建議戶外使用的雕花鏤空鋁單板的厚度控制在2.5mm以上.
According to the national requirements, the aluminum sheet with a thickness of less than 2.0mm can not be used for exterior wall decoration. After carving, the aluminum single board has the characteristics of ventilation, which is more affected by the wind force than the ordinary curtain wall aluminum panel. If the thickness is insufficient, the deformation phenomenon will appear. It is suggested that the thickness of the carved hollowed aluminum sheet for outdoor use is controlled above 2.5mm.
感謝您的閱讀，此文的文章來源：鋁卷生產廠家更多的內容和問題請點擊：http://www.jzbook123.cn我們會繼續努力的為您提供服務，感謝您的支持！
Thank you for reading. The source of this article is: more contents and questions of aluminum coil manufacturers. Please click: http://www.jzbook123.cn, we will continue to work hard to provide services for you, thank you for your support.